Removing And Installing Air Flow Mass Meter G70 - Skoda Octavia III 2013 Workshop Manual

– Separate electrical plug connection -1-.
– Unscrew fuel temperature transmitter - G81- -arrow-.
Install
Installation is performed in the reverse order, pay attention to the
following points:
– Check fuel system for tightness
⇒ "1.4 Check the fuel system for tightness", page 322
4.3 Removing and installing air flow mass
meter - G70-
Special tools and workshop equipment required
♦ Hose clip pliers - VAS 6362-
– Remove engine cover
⇒ "1.1 Removing and installing engine trim panel", page 10
– Disconnect vacuum hoses on the air guide pipe -arrows-.
– Loosen hose clamps -1-, -2-, remove intake hose.
1.6/66; 77; 81; 2.0/105; 110; 135 kW TDI CR engine - Edition 07.2014
Octavia III 2013 ➤ , Octavia III 2014 ➤
.
.
343
4. Senders and sensors