Skoda Octavia III 2013 Workshop Manual page 192

Octavia III 2013 ➤ , Octavia III 2014 ➤
1.6/66; 77; 81; 2.0/105; 110; 135 kW TDI CR engine - Edition 07.2014
– Loosen hose clamp -1-, remove coolant hose.
– Unscrew double screw -2- and screw -3-, remove rear right
coolant pipe.
Install
Installation is performed in the reverse order, pay attention to the
following points:
Note
Replace O-ring after disassembly.
♦
Secure all hose connections with spring-type clips that comply
♦
with the series design ⇒ ETKA - Electronic Catalogue of Orig‐
inal Parts .
– Install exhaust gas cleaning module
⇒ "2.2 Removing and installing exhaust gas cleaning module",
page 392 .
– Install front silencer
⇒ "1.2 Removing and installing exhaust pipe", page 380
– Install the rear coolant pipe
⇒ "3.7 Removing and installing the rear coolant pipe",
page 179 .
– Install the left coolant pipe
⇒ "3.6 Remove and install the left coolant pipes", page 178
– Top up coolant ⇒ page 153
Tightening torques
♦ ⇒ "3.1 Summary of components - coolant pipe", page 170
♦ ⇒ "1 Removing and installing exhaust pipes/silencers",
page 370
♦ Summary of components - cardan shaft ⇒ Chassis; Rep. gr.
40
184
Rep. gr.19 - Cooling
.
.
.