Skoda Octavia III 2013 Workshop Manual page 59

– Loosen screw -arrow- for camshaft toothed belt pulley; to do
so, use counterholder - T10172- with adapters -T10172/11- .
– Lock hub of the high pressure pump using the rig pin -
T10492- ; to do so, insert the rig pin into fork -2- of the hub and
into the bore behind it -1- in the auxiliary units bracket.
– Loosen nut -arrow- for high pressure pump toothed belt pulley
by approximately 90°, use counterholder - T10051- to do so.
– Loosen nut -1- for tensioning pulley.
– Carefully turn eccentric of the tensioning pulley with offset
screwdriver - T10264- clockwise -arrow- until the tensioning
pulley can be interlocked with the rig tool - T10265- .
1.6/66; 77; 81; 2.0/105; 110; 135 kW TDI CR engine - Edition 07.2014
Octavia III 2013 ➤ , Octavia III 2014 ➤
1. Removing and installing a V-ribbed belt and a toothed belt
51