Exhaust Temperature Regulation; Summary Of Components - Exhaust Temperature Regulation - Skoda Octavia III 2013 Workshop Manual

Octavia III 2013 ➤ , Octavia III 2014 ➤
1.6/66; 77; 81; 2.0/105; 110; 135 kW TDI CR engine - Edition 07.2014
3

Exhaust temperature regulation

⇒ "3.1 Summary of components - exhaust temperature regula‐
tion", page 402
⇒ "3.2 Removing and installing exhaust gas temperature trans‐
mitter", page 403
3.1 Summary of components - exhaust tem‐
perature regulation
Caution
Malfunction caused by loose exhaust gas temperature trans‐
mitter
♦ The threads of the exhaust gas temperature transmitter -
G495- and -G648- are coated. They must NOT be coated
additionally with hot bolt paste and must be tightened to
the specified tightening torque.
1 - Lambda probe downstream
of catalytic converter - G130-
with heating for lambda probe
- Z29-
❑ only for vehicles with en‐
gine identification char‐
acters CRKB, CRMB,
CUNA
❑ removing and installing
⇒ "5.3 Removing and in‐
stalling Lambda probe
after catalytic converter
G130 ", page 353
2 - Exhaust gas temperature
transmitter 4 - G648-
❑ removing and installing
⇒ "3.2 Removing and in‐
stalling exhaust gas
temperature transmit‐
ter", page 403
❑ the thread of the ex‐
haust gas temperature
transmitter is coated
and must not be coated
additionally with hot bolt
paste
❑ 2.0l engines: 60 Nm
❑ 1.6l engines: 45 Nm
3 - Exhaust gas temperature
transmitter 1 - G235-
❑ removing and installing
⇒ "3.2 Removing and in‐
stalling exhaust gas
temperature transmit‐
ter", page 403
❑ Coat threads with hot
bolt paste; hot bolt paste
⇒ ETKA - Electronic Catalogue of Original Parts
❑ 45 Nm
402
Rep. gr.26 - Exhaust system