Skoda Octavia III 2013 Workshop Manual page 22

Octavia III 2013 ➤ , Octavia III 2014 ➤
1.6/66; 77; 81; 2.0/105; 110; 135 kW TDI CR engine - Edition 07.2014
– Raise holding clamps -arrows-, remove coolant hoses from
heat exchanger for heating.
– Expose the following plug connections and electric cables:
1 - for exhaust gas temperature transmitter 4 - G648-
2 - for exhaust gas temperature transmitter 3 - G495-
– Take electrical plug connection-3- for lambda probe - G39- out
of the holder, disconnect and expose electric cable.
Vehicles fitted with auxiliary heating
– Remove heat protection sleeve -2-.
– Loosen hose clamp -1-, remove coolant hose.
Continued for all vehicles
– Disconnect the plug connection -5- at the differential pressure
transmitter - G81- .
WARNING
Risk of scalding by very hot fuel.
♦ The temperature of the fuel lines and fuel can be up to 100
°C after switching off the engine in extreme cases. Let the
fuel cool down before opening the fuel line connections,
as otherwise there is a high risk of scalding.
♦ Wear protective gloves.
♦ Wear safety goggles.
– Loosen hose clamps -4-, -6- remove fuel supply hose and re‐
turn hose.
– Loosen hose clamps -1-, -3-, remove coolant hoses.
– Release screw -2-.
14
Rep. gr.10 - Removing and installing engine