Skoda Octavia III 2013 Workshop Manual page 262

Octavia III 2013 ➤ , Octavia III 2014 ➤
1.6/66; 77; 81; 2.0/105; 110; 135 kW TDI CR engine - Edition 07.2014
– Unclip sealing grommet -1- downwards from the cover -2-.
– Guide the cover -2- backward at the electric wiring loom -3-.
– Unlock electrical plug connections -1-, -2- on closing flange to
unlock the connector lock.
– If present, disconnect electrical plug connection -3- for auxili‐
ary heating dosing pump - V54- , thereby unlocking the con‐
nector lock.
– Push up fixing catch -2- with a finger between the bottom plate
and the fuel tank arrow -A-.
– Simultaneously pull the fuel pump control unit - J538- Pos.
-1- at the electric wiring loom -3- carefully out of the uptake
arrow -B-.
– Take out fuel pump control unit - J538- inwards between fuel
tank and bottom plate.
– Clean the area around the fuel filler neck.
– Unscrew the cap from the fuel filler neck.
Note
Close the opening of the fuel filler neck with a clean cloth so that
no dirt can penetrate.
– Remove tank flap unit ⇒ Body Work; Rep. gr. 55 .
– Unscrew right rear wheel ⇒ Chassis; Rep. gr. 44 .
– Remove the rear right wheelhouse liner ⇒ Body Work; Rep.
gr. 66 .
Vehicles with torsion beam axle
– Remove the rear wheel brake calliper and store to on side ⇒
Suspension; Rep. gr. 46 .
– Disconnect the plug connection from the ABS speed sensor,
right rear wheel, and undo the line from the mounting brackets
at the rear axle ⇒ Suspension; Rep. gr. 45 .
Continued for all vehicles
254
Rep. gr.20 - Fuel supply system