Skoda Octavia III 2013 Workshop Manual page 312

Octavia III 2013 ➤ , Octavia III 2014 ➤
1.6/66; 77; 81; 2.0/105; 110; 135 kW TDI CR engine - Edition 07.2014
Version 1
– Hook in the control rod at the adjuster lever, attach the pres‐
sure box, and turn in the screws -1- as far as they can go by
hand.
– Install the circlip -4-.
– Connect the electrical plug connection -3- to the position send‐
er for charge pressure regulator - G581- .
Version 2
– Hook in the control rod at the adjuster lever, attach the pres‐
sure box, and turn in the screws -3- as far as they can go by
hand.
– Install the circlip -4-.
– Connect the electrical plug connection -2- to the position send‐
er for charge pressure regulator - G581- .
Continued for all versions
– Adjust the control rod for the dashpot, measuring the initial
tension as you do so.
– You must use ⇒ Vehicle diagnostic tester.
•
Targeted functions
•
01 - read measured value block
– Put the sliding ring -1- of the hand vacuum pump - VAS 6213-
in position-A- for "vacuum"
304
Rep. gr.21 - Turbocharging/supercharging