Removing And Installing Oil Pressure Switch For Reduced Oil Pressure F378 - Skoda Octavia III 2013 Workshop Manual

Octavia III 2013 ➤ , Octavia III 2014 ➤
1.6/66; 77; 81; 2.0/105; 110; 135 kW TDI CR engine - Edition 07.2014
– Expose coolant hose -2-.
– Unlock catches -arrows-, remove top part-1- of air guide.
– Release screw left and right -arrow-.
– Unclip and remove bottom part -1- of air guide.
– Disconnect plug connection -arrow-.
Note
Place a cloth underneath to absorb escaping engine oil.
– Screw out oil pressure switch - F1- .
Install
Installation is performed in the reverse order, pay attention to the
following points:
Note
Replace gasket ring.
– Checking the oil level ⇒ Maintenance ; Booklet Octavia III .
Tightening torques
♦ ⇒ "1.3 Summary of components - oil filter holder", page 130
♦ ⇒ "6.4 Summary of components - air filter", page 362
1.8 Removing and installing oil pressure
switch for reduced oil pressure - F378-
Removing
– Remove air filter
⇒ "6.5 Removing and installing air filter", page 364
140
Rep. gr.17 - Lubrication
.