Skoda Octavia III 2013 Workshop Manual page 237

– Unclip cover -1- for the right closing flange with the disassem‐
bly wedge - 3409- on the retaining tabs -arrows-.
– Unclip sealing grommet -1- downwards from the cover -2-.
– Guide the cover -2- backward at the electric wiring loom -3-.
– Unlock electrical plug connections -1- and -2- on the closing
flange and remove them.
Vehicles fitted with auxiliary heating
– Unhook plug connection -3- for the dosing pump - V54- from
the closing flange.
– Unlock plug connection -3- for the dosing pump - V54- and
remove it.
Continued for all vehicles
– Push up catch -2- in arrow direction -A-.
– To do so, reach between bottom plate and fuel tank with a
finger.
– At the same time, carefully pull the fuel pump control unit -
J538- -1- carefully at the electrical wiring loom -3- out of the
uptake in arrow direction -B-.
– Take out fuel pump control unit - J538- inwards between fuel
tank and bottom plate.
– Put fuel pump control unit - J538- to one side together with the
electrical wiring harness.
1.6/66; 77; 81; 2.0/105; 110; 135 kW TDI CR engine - Edition 07.2014
Octavia III 2013 ➤ , Octavia III 2014 ➤
2. Removing and installing parts of the fuel supply system
229