Skoda Octavia III 2013 Workshop Manual page 302

Octavia III 2013 ➤ , Octavia III 2014 ➤
1.6/66; 77; 81; 2.0/105; 110; 135 kW TDI CR engine - Edition 07.2014
Left-hand drive
– if a vacuum hose is present: Remove it -arrow- and lay to the
side.
– Press release buttons on the hose -1- for crankcase ventilation
and remove from cylinder head cover.
– Disconnect vacuum hoses on the air guide pipe -arrows-.
– Release screw -2-, swivel air guide pipe with inlet connection
towards the rear and detach from exhaust gas turbocharger.
– Release screws -arrows- and remove pre-volume tank -1-.
– Press heat protection sleeve to the side, disconnect electrical
plug connection -5-.
– Loosen hose clamp -3-, remove air guide hose.
– Loosen hose clamp -4-, remove coolant hose.
– Unscrew screw -1- using socket insert XZN 10 - T10501- ,
loosen screw -2-.
Vehicles with four-wheel drive
– Remove radiator for exhaust gas recirculation
⇒ "4.5 Removing and installing radiator for exhaust gas recir‐
culation", page 415
Continued for left-hand drive vehicles
294
Rep. gr.21 - Turbocharging/supercharging
.