Removing And Installing Exhaust Gas Temperature Transmitter - Skoda Octavia III 2013 Workshop Manual

4 - Exhaust gas temperature transmitter 2 - G448-
❑ only for vehicles with engine identification characters CRKB, CRMB, CUNA
❑ the thread of the exhaust gas temperature transmitter is coated and must not be coated additionally with
hot bolt paste
❑ removing and installing
⇒ "3.2 Removing and installing exhaust gas temperature transmitter", page 403
❑ 60 Nm
5 - Screw
❑ Tightening torque
6 - Differential pressure transmitter - G505-
❑ removing and installing
⇒ "4.7 Removing and installing differential pressure transmitter G505 ", page 348
7 - Support
8 - Exhaust gas pressure sensor 1 - G450-
❑ only for vehicles with engine identification characters CRKB, CRMB, CUNA
❑ removing and installing
⇒ "4.8 Removing and installing pressure sensor for exhaust gas 1 G450 ", page 349
9 - Screw
❑ Tightening torque
10 - Exhaust gas temperature transmitter 3 - G495-
❑ removing and installing
⇒ "3.2 Removing and installing exhaust gas temperature transmitter", page 403
❑ the thread of the exhaust gas temperature transmitter is coated and must not be coated additionally with
hot bolt paste
❑ 2.0l engines: 60 Nm
❑ 1.6l engines: 45 Nm
11 - lambda probe - G39- with heating for lambda probe - Z19-
❑ removing and installing
12 - Exhaust gas cleaner
3.2 Removing and installing exhaust gas
temperature transmitter
⇒ "3.2.1 Removing and installing the exhaust gas temperature
transmitter 1 G235 ", page 403
⇒ "3.2.2 Remove and install exhaust gas temperature transmitter
3 G495 / exhaust gas temperature transmitter 4 G648 ",
page 404
⇒ "3.2.3 Removing and installing exhaust gas temperature trans‐
mitter 2 G448 (engine identification characters CRKB, CRMB,
CUNA)", page 406
3.2.1 Removing and installing the exhaust
gas temperature transmitter 1 - G235-
Special tools and workshop equipment required
♦ Extension SW 17 , e.g. -V.A.G 1331/10-
1.6/66; 77; 81; 2.0/105; 110; 135 kW TDI CR engine - Edition 07.2014
⇒ page 351
⇒ page 351
⇒ "5.2 Removing and installing Lambda probe G39 ", page 352
Octavia III 2013 ➤ , Octavia III 2014 ➤
3. Exhaust temperature regulation
403