Skoda Octavia III 2013 Workshop Manual page 51

1 - Bottom toothed belt guard
❑ removing and installing
⇒ "1.9 Removing and in‐
stalling bottom toothed
belt guard", page 48
2 - Screw
❑ with collar
❑ inserted in the bottom
toothed belt guard such
that it cannot be lost
❑ 12 Nm
3 - Support
❑ for coolant lines
4 - Screw
❑ 5 Nm
5 - Pipeline
❑ to differential pressure
transmitter - G505-
6 - Clip
7 - Screw
❑ 5 Nm
8 - Support
❑ for coolant lines
9 - Heat shield
10 - Screw
❑ 5 Nm
11 - Bracket
12 - Top toothed belt guard
❑ removing and installing
⇒ "1.8 Removing and installing top toothed belt guard", page 45
13 - Screw
❑ Insert with safety agent ⇒ ETKA - Electronic Catalogue of Original Parts
❑ 12 Nm
14 - Rear toothed belt guard
❑ to remove, remove coolant pump
1.6/66; 77; 81; 2.0/105; 110; 135 kW TDI CR engine - Edition 07.2014
⇒ "2.4 Removing and installing coolant pump", page 163
Octavia III 2013 ➤ , Octavia III 2014 ➤
1. Removing and installing a V-ribbed belt and a toothed belt
43