Skoda Octavia III 2013 Workshop Manual page 103

– Press release buttons on the hose -1- for crankcase ventila‐
tion, remove hose from cylinder head cover.
– Disconnect vacuum hoses on the air guide pipe -arrows-.
– Release screw -2-, swivel air guide pipe with inlet connection
towards the rear and detach from exhaust gas turbocharger.
– Release screws -arrows- and remove pre-volume tank -1-.
– Loosen hose clamp -1-, remove coolant hose.
– Unscrew screw -2-, remove screw -3- and swivel coolant line
to the side.
– Expose the following plug connections and electric cables:
2 - for exhaust gas temperature transmitter 4 - G648-
3 - for exhaust gas temperature transmitter 3 - G495-
– Take electrical plug connection-4- for lambda probe - G39- out
of the holder, disconnect and expose electric cable.
Vehicles with four-wheel drive
– Remove radiator for exhaust gas recirculation
⇒ "4.5 Removing and installing radiator for exhaust gas recir‐
culation", page 415
1.6/66; 77; 81; 2.0/105; 110; 135 kW TDI CR engine - Edition 07.2014
.
Octavia III 2013 ➤ , Octavia III 2014 ➤
1. Removing and installing cylinder head
95