Intake Manifold; Assembly Overview - Intake Manifold - Skoda Octavia III 2013 Workshop Manual

Octavia III 2013 ➤ , Octavia III 2014 ➤
1.2/63; 77 kW TSI engine - Edition 11.2014
3

Intake manifold

⇒ "3.1 Assembly overview - intake manifold", page 240
⇒ "3.2 Removing and installing intake manifold", page 241
⇒ "3.3 Removing and installing the throttle valve control unit GX3
", page 244
⇒ "3.4 Clean throttle valve control unit GX3 ", page 246
3.1

Assembly overview - intake manifold

1 - Coolant pipe
❑ clipped onto the intake
manifold
2 - Intake manifold
❑ Building unit with charge
air cooler
❑ installing and removing
⇒ "3.2 Removing and in‐
stalling intake manifold",
page 241
3 - Coolant pipe
❑ clipped onto the intake
manifold
4 - Screw
❑ Tightening torque and
tightening order
⇒ page 241
5 - O-ring
❑ replace after removal
6 - Charge pressure sender -
GX9-
❑ comprises:
Intake air temperature
sender 2 - G299-
Intake manifold pressure
sender - G71-
❑ installing and removing
⇒ "5.1 Removing and
installing intake mani‐
fold pressure sender
GX9 ", page 257
7 - Gasket
❑ replace after removal
8 - Charge pressure sender - GX26-
❑ comprises:
Charge pressure sender - G31-
Intake air temperature transmitter - G42-
❑ installing and removing
9 - O-ring
❑ replace after removal
240
Rep. gr.24 - Mixture preparation - injection
⇒ "2.2 Removing and installing charge pressure sender GX26 ", page 229