Table of Contents
Advertisement
Chapter 17
Displaying Status Information
For more information about Annex lists, see Saving and
Opening Annex Lists on page 4-13.
2
Select
T1
The
Annex Modem Calls Status
information for the Annex you selected appears in the
Modem Calls
Displaying Dial VPN Services (DVS) Status
Information
The
Annex Dial VPN (Virtual Private Network) Services (DVS) Status
information for all active tunnel interfaces. This section includes:
Displaying the Annex
Understanding the Annex
Viewing Annex
Displaying the Annex DVS Status Window
Displaying the Window
The
command originates in the Status menu. To display the window:
DVS
1
Create an Annex list in the main window.
For more information about creating Annex lists, see Saving
and Opening Annex Lists on page 4-13.
2
Select a single Annex that contains a tunnel from the list.
3
Hold the mouse button on the Status menu, select
The
Annex DVS Status
The following example shows the
17-32
and
Modem Calls.
box.
DVS
Dial VPN Services
window appears (see Figure 17-8).
CSMIM/Micro-CS Management Application Guide
window appears. The
Status Window
Status Window
DVS
(DVS) Status Information
window.
Annex DVS Status
T1 Modem Calls
Internal
command provides
DVS.
Advertisement
Table of Contents
