Table of Contents
Advertisement
Use 1 to 128 characters.
Contain any number of lines. You can change the
window's size to display a message that exceeds the standard
message box, or you can use
your message.
The
command uses the standard message followed by the date
Broadcast
and time information and by the text you entered. For example, a broadcast
message sent to warn users that you want to boot an Annex might read
***
Broadcast from SNMP net manager
[Thu Aug 18 11:16:34 1994]*** Please log off Emma immediately for reboot.
Using Push Buttons
uses the following push buttons:
Broadcast
Apply
selected.
Help
command.
Close
Sending a Broadcast Message
Using the Broadcast Command
You can use
Broadcast
terminals connected to an Annex. To send a message:
1
Create an Annex list and select one or more Annexes.
For more information about creating lists, see Saving and
Opening Annex Lists on page 4-13.
2
Select
Broadcast
The
Broadcast
3
Choose the
You can select
to Choosing a Broadcast Destination earlier in this chapter.
4
Enter message text in the
CSMIM/Micro-CS Management Application Guide
activates the
Broadcast
displays a window that explains the
removes the
Broadcast
when you need to communicate quickly with all
from the Configure menu.
window displays (see Figure 16-5).
Broadcast Destination
,
or
All
Async
Virtual
Broadcasting Messages
and
to display any part of
command for the Annexes you
window from your display.
you need.
. For detailed information, refer
Broadcast Message
Broadcast
Broadcast
box.
16-15
Advertisement
Table of Contents
