Cabletron Systems CSMIM-T1 Administrator's Manual page 381

rupiahs
contains the password that controls authentication for RIP packets. Annex
Manager displays this parameter's value as
here, or as
unset
is turned off and that all RIP packets are accepted.
Type Annex
Value 16 characters
Default " " (null string)
Lists Annex Only, Routing
rip_default_route
allows an Annex to advertise that it is the default router. You can enter a
number from 1 to 15 to indicate the hop count that will be advertised.
Entering turns off the advertisement.
0
Type Interface
Values 0 through 15
Default 0
Lists Enet Port, Async Port, Routing
rip_horizon
controls the split horizon algorithm for RIP. You can enter:
to disable split horizon.
off
to enable split horizon without poison. Split horizon
split
prevents a route from being advertised over the interface on
which it was learned.
to enable split horizon with poison reverse. Poison
poison
reverse advertises the route over the interface on which it was
learned, but sets the hop count to 16.
Type Interface
Values off, split, poison
Default poison
Lists Enet Port, Async Port, Routing
CSMIM/Micro-CS Management Application Guide
if you enter a null string.
if you enter the password
set
indicates that authentication
Unset
19-81