Table of Contents
Advertisement
Chapter 1
Installing Annex Manager
The installation script will extract Annex Manager from the tar
device:
Calling command: tar -xf <tar_device> gui_am
This may take some time.
8
After the extraction, the installation script will begin to install
Annex Manager and will prompt you for information:
Beginning Annex Manager 2.3 Installation
The environment variable GUI_AM_DIR is set to '/usr/annex/gui_am_R2.3'.
The installation script will merge data from the current installation
(unknown) in '/usr/annex/gui_am_R2.3' into the installation
directory, '/u1/annex_manager'.
9
If you installed Annex Manager previously, the installation merges
existing data files in the new directory.
To merge files, select
not want to merge files, abort the installation, make the necessary
changes and restart the installation process from the beginning.
If this is correct, press 'c' to continue.
Otherwise,
Continue (c/a) [c]
10 The installation script detects the platform automatically and
installs only the binaries for the appropriate platform:
The installation program has detected that you are currently running the SunOS
operating system.
Is this correct (y/n) [y]
1-4
To merge existing Annex Manager data with
this new installation, enter a new, unused
directory.
, as shown in the example below. If you do
c
- abort by pressing 'a'
- make the necessary changes for your correct installation
- restart the installation process.
CSMIM/Micro-CS Management Application Guide
Advertisement
Table of Contents
