Table of Contents
Advertisement
Defining Boot Options
You can choose one of the following
Immediate
command.
accepts a
Delayed
enter more than one delayed request. However, if you enter a
second request for a time earlier than an existing request, the
selected Annexes will boot at the earlier time and all other
existing boot requests will be deleted.
saves the current image to the address you enter in the
Dump
Pref Dump Addr
Diagnostic
tests. When these tests end, the Annex is in ROM Monitor
mode and cannot respond to Annex Manager requests until
you boot it.
cancels all delayed boot requests.
Abort
boots the Annexes you selected without sending a
Quiet
warning message to users.
Save In Flash
When you reboot, you can use the image in the flash memory
rather than an image from a server on the network.
names and an indication of shutdown. For
includes the boot time. For
cancellation.
Using Text Fields
The window's text fields control the
time, image, and message to users:
Pref Load Addr
will load the image.
CSMIM/Micro-CS Management Application Guide
boots selected Annexes as soon as you activate the
Boot Time
field.
places an Annex in test mode and begins diagnostic
loads the boot image and saves it in flash memory.
For
other than
Boot Options
status message to all terminals connected to the
Annexes you are booting. Each message contains Annex
stores the address from which the boot command
buttons:
Boot Option
at which the boot will occur. You can
, Annex Manager sends a
Quiet
, the message indicates
Abort
command's addresses, source,
Boot
Booting Annexes
, the message
Delayed
16-3
Advertisement
Table of Contents
