Cabletron Systems CSMIM-T1 Administrator's Manual page 225

Using Boot Window Buttons
uses the following push buttons:
Boot
Apply
selected.
Help
Close
Understanding Boot Command Messages
The command sends a standard message to all terminals connected
Boot
to the Annexes you are booting. Message text depends on the options
you select. If you select:
Immediate
includes the Annex names and an indication of shutdown. For
example, booting an Annex named "Emma" sends the following
message:
manager***
, the message contains the boot time and amount of time
Delayed
until the boot will take place. For example, if you schedule a
boot for 11:50 a.m. on Thursday, the message would say
***Annex
Annex (emma) going down in 57 minutes (11:50 Thu).
to stop a scheduled boot, the message indicates that the
Abort
boot has been cancelled. For example, if you cancel the boot
scheduled for 11:50 a.m. on Thursday, the message reads
Annex (emma) boot at 11:50 is canceled
, no boot messages are sent.
Quiet
For all options except
field. If you create your own message, its text follows the standard
Message
boot message.
CSMIM/Micro-CS Management Application Guide
activates the
displays a window that explains the
removes the
, ,
Dump Diagnostic
(
***Annex emma) shutdown message from NA by SNMP@network
.
(
emma) shutdown message from NA by SNMP@network manager
, you add your own message by using the
Quiet
command for the Annexes you
Boot
window from your display.
Boot
, or , the message text
Save in Flash
.
Booting Annexes
command.
Boot
***
Boot
16-5