Table of Contents
Advertisement
Choosing Copy Options
The
button defines the parameters whose values will be copied.
Copy Option
You can select one of the following buttons:
Main Window Params
selected in the main window. If you use this option with a
parameter group or list that includes port parameters or with
individual port parameters, you can copy values from one port
only.
Annex Only Params
parameters, from the Annex you select.
Async Port Params
from one Annex and port.
Printer Port Params
Annex and port.
Enet Port Params
Annex and port.
The
DS1 Line Params
Annex and port.
The message below these buttons summarizes your selections. If you
chose
Main Window Params
window. After you select an option, you can choose the Annexes and ports
you want for the copying process.
Execute Script
Selecting Annexes and Ports for Copying
The
window provides two Annex list boxes, a port type button and two
Copy
port number fields that allow you to specify the origin and destination of
parameter values.
Using Annex List Boxes
includes two Annex list boxes.
Copy
CSMIM/Micro-CS Management Application Guide
copies values for the parameters you
copies the parameters, excluding port
copies asynchronous port parameter values
copies printer port parameter values from one
copies Ethernet port parameter values from one
copies DS1 line parameter values from one
, the message includes information from the main
does not provide an option for copying all
Copy
parameters. If you want to copy all parameters from one
Annex to another, you should use the
commands explained in .
Copying Parameter Values
Create Script
and
15-11
Advertisement
Table of Contents
