Changing Definitions For Isdn Primary Rate Annexes - Cabletron Systems CSMIM-T1 Administrator's Manual

6 Copy the configuration file to alternate load hosts and to self-boot
units
For more information, see Understanding the Modem
Database later in this chapter.
Changing Definitions for ISDN Primary Rate Annexes
To edit a definition for ISDN Primary Rate Annexes:
Changing Definitions for ISDN Primary Rate Annexes
1 Display the
2 Change existing values in the
Command
3 Press
Annex Manager closes the
to the
Call Defaults
4 Press
A confirmation window appears. You can press
continue or
Figure 9-3. Modem Definition ConfIrmation Window
CSMIM/Micro-CS Management Application Guide
Creating and Changing Modem Definitions
If you create a new modem definition or edit
one that exists in the Annex configuration file,
your changes modify the current file. If you edit
a definition for which defaults exist, Annex Manager
copies the definition and places it in the Annex
configuration file. You can use the
button in this case to see original values.
values
window and press
Call Defaults
, and
Dialout Setup Command
.
OK
window.
Apply
to return to the window.
Cancel
Revert to default modem
Connect Status String
fields.
window and returns you
Edit Modem
.
Edit Modem
,
Dialin Setup
to
OK
9-5