Displaying T1 Internal Csu Status Information; Displaying The Annex T1 Internal Csu Status Window - Cabletron Systems CSMIM-T1 Administrator's Manual

1 Create an Annex List in the main window and select a single
Annex.
For more information about Annex lists, see Saving and
Opening Annex Lists on page 4-13.
2 Hold the mouse button on the status menu, select
Choose Internal CSU and release the mouse button.
3
The
Annex PRI Internal CSU Status
4 Select an Interval(s) option.
You can select
, go to step 5.
Total
5 Enter the interval numbers you need in the
You can enter one or more numbers, a range of numbers
separated by commas or dashes, or
6 Press
T1 engine status information appears in the
and
Status,

Displaying T1 Internal CSU Status Information

The
Annex T1 Internal CSU
network interface. This section includes:

Displaying the Annex T1 Internal CSU Status Window

Understanding the Annex T1 Internal CSU Status Window
Viewing T1 Internal CSU Status Information
Displaying the Annex T1 Internal CSU Status Window
Displaying the Window
The
T1 Internal CSU
window:
1 Create an Annex list in the main window.
CSMIM/Micro-CS Management Application Guide
Displaying T1 Internal CSU Status Information
,
Specified Current
.
Apply
Interval Information
command provides information about the Annex T1
command originates in the Status menu. To display the
window appears.
, or . If you select
Total
.
all
boxes.
PRI.
or
Current
field.
Interval(s)
,
PRI CSU Alarms PRI CSU
17-23