Cabletron Systems CSMIM-T1 Administrator's Manual page 314

Chapter 19 Annex Parameters
CallDef_echo
directs an ISDN Primary Rate Annex to echo all characters as a user types.
This parameter applies only to the CLI level.
Type Annex
Values enabled or disabled
Default enabled
Lists Annex Only, Call Defaults, Cmd Line Editing
CallDef_erase_char
uses a control character sequence to define the CLI erase character.
Type Annex
Values
Ctrl
Default
Ctrl
Lists Annex Only, Call Defaults, Cmd Line Editing
CallDef_erase_line
uses a control character sequence to define the CLI line erase character.
Type Annex
Values
Ctrl
Default
Ctrl
Lists Annex Only, Call Defaults, Cmd Line Editing
CallDef_erase_word
uses a control character sequence to define the CLI word erase character.
Type Annex
Values
Ctrl
Default
Ctrl
Lists Annex Only, Call Defaults, Cmd Line Editing
CallDef_forward_key
defines the character sequence that opens the next higher-numbered
session established through a call. Xylogics recommends that you use a
sequence with
19-14
+ any character
+ (displays as ^?)
Delete
+ any character
+
(displays as ^U)
U
+ any character
+
(displays as ^W)
W
+ a character. The key displays as ^. If you use more
Ctrl
CSMIM/Micro-CS Management Application Guide