Cabletron Systems CSMIM-T1 Administrator's Manual page 379

ps_history_buffer
is used with the
port keeps in a buffer. Incoming data is buffered continuously before,
during, and after the Telnet session. The port must be reset after you
change this parameter value.
Type Async
Values 0 to 32767
Default 0
Lists Async Ports, Basic Async Port
redisplay_line
defines the reprint line character for CLI users.
Type Async
Values
Ctrl
Default
Ctrl
Lists Async Port, Command_Line_Editing
remote_address
contains the IP address for a host at the other end of the serial line. This
parameter works only when the mode parameter is set to
Type Async
Values IP address
Default 0.0.0.0
Lists Async Port, PPP, SLIP
reset_idle_time_on
defines whether input or output resets the idle timer. The idle time is the
time lapse between activity and inactivity at the device. This parameter
works with the
Type Async
Values input or output
Default input
Lists Async Port, Idle Timer
CSMIM/Micro-CS Management Application Guide
command to indicate how much incoming data a slave
telnet
+ any character
+ (displays as ^R)
R
command.
who
, or
autodetect slip ppp
19-79
.