Preface; About The Documentation - Cabletron Systems CSMIM-T1 Administrator's Manual

Annex Manager is a graphical user interface that allows you to configure
one or more Annexes easily and quickly. Annex Manager's window software
gives you access to all Annex SNMP-configurable parameters and
commands.
The Annex Manager User Guide is intended for System Administrators or
others who need to configure Annex remote access communication
servers. It assumes that you are familiar with network protocols and that
you know the parameter values you need to configure Annexes.

About the Documentation

This book provides complete Annex Manager documentation. It explains
all Annex Manager commands and gives you step-by-step directions for
using each command. In addition, it describes each parameter eligible for
Annex Manager processing.
The Annex Manager User Guide includes the following parts and chapters:
Introduction provides an overview of Annex Manager features
and platforms.
Part 1, Annex Manager Basics:
Chapter 1, Installing Annex Manager provides directions
for installing the software.
Chapter 2, Window Basics presents basic windows tools
that you can use throughout any Annex Manager session.
Chapter 3, Working with Annex Manager Windows
describes Annex Manager's command, secondary,
warning, and help windows.
Chapter 4, Using the Main Window explains all features in
the main window. It includes directions for creating and
using Annex lists.
Part 2, Setup Mode:
CSMIM/Micro-CS Management Application Guide

PREFACE

1