Setting Environment Variables; Working With Sunnet Manager; Linking Annex Manager With Sunnet Manager - Cabletron Systems CSMIM-T1 Administrator's Manual

Setting Environment Variables

When you complete installation procedures you need to set environment
variables:
1 Set the GUI_AM_DIR environment variable to:
2 Put the /u1/annex_manager/bin directory in your path.
3 Set the DISPLAY environment to point to the host where you
want Annex Manager to appear.
You can put these commands in your .
equivalent script.

Working with SunNet Manager

Although Annex Manager is a stand-alone application, it can be loosely
linked to SunNet Manager so that a network administrator can click on an
icon representing an Annex in the network map and select Annex Manager
from a list of tools for that node.

Linking Annex Manager with SunNet Manager

You can link Annex Manager and SunNet Manager from the Console
Commands/Tools option menu or from Annex icons. In both cases, you
must link Annex Manager in the
directory.
Adding Annex Manager to the Console Commands/Tools Option Menu
To add Annex Manager to the Console Commands/Tools option menu:
Add the following information in the instance elementCommand
section of the xylogics.schema file.
instance element Command (
(SNM_Console "Annex-Manager..." "$GUI_AM_DIR/bin/gui_am")
)
CSMIM/Micro-CS Management Application Guide
The steps described here are specific to SunNet
Manager Release 2.2 and may vary if you are using a
different version of SunNet Manager.
xylogics.schema
Setting Environment Variables
/u1/annex_manager
, . , .
cshrc login
file located in the
or an
profile,
/usr/snm/struct
1-7