Cabletron Systems CSMIM-T1 Administrator's Manual page 325

hardware
Type Annex
Values none, xonXoff, hardware
Default none
Lists Annex Only, Flow Control, Modem, Call Defaults
CallDef_port_
multisession
enables two active windows on DEC's TD/SMP-supported(VT420 or
VT330) terminals that are dialed in to an ISDN Primary Rate Annex. The
feature is available to all calls on which the VCI interface is configured.
Type Annex
Values enabled or disabled
Default enabled
Lists Annex Only, Call Defaults
CallDef_port_password
defines a password for an ISDN Primary Rate Annex call. You can use this
password as a back-up for host-based security if the security servers do
not respond, or as an additional line of security after you enter a user name
and password. For security reasons, Annex Manager displays this value
as or .
set unset
Type Annex
Values 0 to 15 characters
Default unset
Annex Only, Modem, Modem Internal, Call Defaults, Synch
Lists
Call Defaults
CSMIM/Micro-CS Management Application Guide
to indicate that flow control is delegated to a lower level.
If you use SecurID, set
(" "). Please refer to the CSMIM/MicroCS Administrator's
Guide for UNIX for more information about SecureID.
CallDef_port_password
to a null string
19-25