Table of Contents
Advertisement
Chapter 17
Displaying Status Information
Using Text Fields
This command's text fields control the identification process. You can
complete the following fields:
Search Device
device that stores information about nodes, devices and
addresses on your network. You can use a device name or IP
address here.
Manager's default community string to communicate with the
search device and with each device it queries.
SNMP Timeout
Manager waits for a response. You can enter a number of
seconds here. If you do not enter a value here,
Annexes/Search Device
SNMP Retries
tries to reach an Annex or other device on the network. You
can enter a number here. If you do not enter a value here, the
discovery process uses the SNMP default.
When you complete these fields, you can choose
discovery process.
Controlling Output
The window's
Verbose Output
that appears in the output box. If you click on the
Annexes/Search Device
about the device type or identifies it as
the
Verbose Output
or are unreachable Annexes.
Understanding the Discovery Output Box
The
Discovery Output
identified by the search device. Annex Manager goes to a search device,
requests a list of addresses in its Address Translation table, and attempts
to communicate with each address via SNMP. If communication is
successful, Annex Manager compares the device's object identifier to the
value of an Annex object identifier. If there is a match, the device is an
Annex. If there is no match, the output box displays information about the
device based on your use of the
17-38
accepts the name or IP address of any network
Discover Annexes/Search Device
specifies the length of time in seconds that Annex
uses the SNMP default.
controls the number of times that Annex Manager
button allows you to determine the level of detail
prints a device name and displays basic information
button, the
sign identifies all devices that are not Annexes
@
box contains detailed information about the Annexes
CSMIM/Micro-CS Management Application Guide
Verbose Output
NOT REACHABLE
command.
Verbose Output
uses Annex
Discover
to initiate the
Apply
button,
. If you do not select
Discover
Advertisement
Table of Contents
