Cabletron Systems CSMIM-T1 Administrator's Manual page 330

Chapter 19 Annex Parameters
CallDef_rs232_async_
parity
defines the parity type for asynchronous connections.
Type Annex
Values none, odd, even
Default none
Annex Only, Basic Async Port, Modem, Modem Internal,
Lists
Call Defaults
CallDef_rs232_async_
stop_bits
specifies the number of stop bits for an asynchronous connection.
Type Annex
Values one, two, one-and-half
Default one
Annex Only, Basic Async Port, Modem, Modem Internal,
Lists
Call Defaults
CallDef_rs232_sync_
clock_source
defines the source of the connection's bit rate clock.
transmit clock is internal and the receive clock is external.
Type Annex
Values clk56, clk64, clk112, clk128, external, split
Default clk56
Lists Annex Only, Call Defaults
CallDef_short _ break
allows an ISDN Primary Rate Annex to return a user to the CLI prompt
after receiving a break of less than two seconds.
Type Annex
Values enabled or disabled
Default enabled
Lists Annex Only, Idle Timer, Call Defaults
19-30 CSMIM/Micro-CS Management Application Guide
indicates that the
Split