Cabletron Systems CSMIM-T1 Administrator's Manual page 326

Chapter 19 Annex Parameters
CallDef_port_server_
security
enables a host-based security policy for access to an ISDN Primary Rate
Annex. If you enter
Type Annex
Values enabled or disabled
Default disabled
Lists Annex Only, Modem, Modem Internal, Security, Call Defaults
CallDef_port_user_
name
defines a default user name for this ISDN Primary Rate Annex.
Type Annex
Values 0 to 16 characters
Default " " (null string)
Lists Annex Only, Security, Call Defaults, Sync Call Defaults
CallDef_ppp_acm
specifies which of the first 32 bytes (0x0 to 0x1F) of the ASCII character
set can be sent as clear text and which should be protocol-escaped.
Type Annex
Values 8 character hexadecimal
Default 00000000
Lists Annex Only, PPP, Call Defaults
CallDef_ppp_mru
defines the maximum receive unit (MRU) that an ISDN Primary Rate Annex
requests as its local MRU.
Type Annex
Values 64 to 1500
Default 1500
Lists Annex Only, PPP, Call Defaults, Sync Call Defaults
CallDef_ppp_ncp
specifies the protocols that run on the interface. The ISDN Primary Rate
Annex negotiates only for those protocols that are specified here. You can
select a single protocol, all protocols, or a combination of two protocols
from the following list:
19-26
, only authorized users can access the Annex.
enabled
CSMIM/Micro-CS Management Application Guide