Cabletron Systems CSMIM-T1 Administrator's Manual page 374

Chapter 19 Annex Parameters
pri_analog_encoding
defines the coding type of an incoming analog (modem) call. If you choose
, the ISDN Primary Rate Annex sets the coding type to
auto
(Europe).
a_law
Type Annex
Values auto, mu_law, a_law
Default auto
Lists DS1 Line, PRI Line
pri_block_in_calls
facilitates ISDN Primary Rate Annex shutdown by automating incoming
call attrition. If you choose
but new incoming calls are blocked.
Type Annex
Values enabled or disabled
Default disable
Lists DS1 Line, PRI Line
pri_block_out_calls
facilitates ISDN Primary Rate Annex shutdown by automating outgoing call
attrition. If you choose
new outgoing calls are blocked.
Type Annex
Values enabled or disabled
Default disable
Lists DS1 Line, PRI Line
pri_dsx1_line_length
defines the length, in meters, of the line from an ISDN Primary Rate Annex
to an external CSU. The value is used when a dsx1 line driver is configured.
Use the default value for an Annex with an internal CSU.
Type Annex
r0-25, r26-65, r66-100, r101-135, r136-165, r166-185,
Values
r186-210
Default r0-25
Lists DS1 Line, PRI Line
19-74
, existing calls are allowed to terminate
enabled
, existing calls are allowed to terminate but
enabled
CSMIM/Micro-CS Management Application Guide
(US) or
mu_law