Displaying Setup Windows; Using The Main Window - Cabletron Systems CSMIM-T1 Administrator's Manual

A
Reset Parameters
needs to reset Annexes or ports for your changes to take effect.
This window appears only when you select
from the main window's pull-down menu.
windows appear when you press
Help
do for all Annex Manager modes and commands. In addition,
the Setup mode provides a single line at the bottom of each
window that gives you a brief summary for each field. A short
message appears automatically as you move the mouse
pointer.
The
Reset Parameters
Manager windows. For more information about these windows, refer to .

Displaying Setup Windows

You must begin with the main window to display Setup windows. When you
press
Setup
appears, you can display additional windows.

Using the Main Window

To display the Setup mode's windows, you must start from Annex Manager's
main window (see Figure 5-1). For detailed information about the main
window, see .
CSMIM/Micro-CS Management Application Guide
window informs you that Annex Manager
, , and
Warning
in the main window and the first Setup mode window
Displaying Setup Windows
windows are the same for all Annex
Help
Confirm Auto Reset
or , as they
Help F1
5-3