Selecting Async Port Settings - Cabletron Systems CSMIM-T1 Administrator's Manual

Authorized Groups
that are accessible to users on an Annex port. You can enter
all, none, a series of numbers separated by commas (e.g., 1,
5, 7) or a range of numbers separated by dashes (e.g., 1, 5,
200-255). You can use any number between 0 and 255.
Using Push Buttons
The
Edit Async Ports (continued)
push buttons. For detailed information about push buttons, see .
Cancel

Selecting Async Port Settings

This section gives you directions for using Annex Manager's three
windows.
Ports
Selecting Ports
Before you can change port settings, you need to select specific ports:
1 Create an Annex list, select one or more Annexes, and press
Setup
The
General
2 Select
Async Ports
The
Async Ports
3 Choose one or more ports from the list.
The next window's settings display current values based on
your selections here. If you choose ports whose settings differ,
some fields in the next window may be blank, or may not be
accessible.
If the
Async Ports
some time or if you have changed values, you can press
Update
4 Press
The
Edit Async Ports
CSMIM/Micro-CS Management Application Guide
specifies the LAT protocol remote group codes
window uses the
.
window appears.
from the
window appears.
window has been displayed on your screen for
to see the most recent port status.
.
Edit Port
window appears.
Selecting Async Port Settings
OK
button.
Setup
, , and
Help
Async
7-13