Table of Contents
Advertisement
CLI Inactivity Timer
that the ISDN Primary Rate Annex remains idle before
disconnecting a CLI session. Entering
timer; entering
as it exits from its last job. You can enter any number of
minutes up to 255. Unlike the call inactivity timer, this timer
does not disconnect a CLI session with active jobs.
Call Inactivity Timer
connection can remain inactive. If the timer expires, the
Annex terminates the call. You can use the
and
If you do not use these buttons, the timer runs independent
of activity. You can enter any number of minutes up to 255
minutes.
Input Is Activity
button, the Annex resets the inactivity timer when it receives
input through an established call.
Output Is Activity
button, the Annex resets the inactivity timer when it sends
On
output.
The
PPP Security
This box uses the following fields:
Remote Username
Primary Rate Annex identifies itself when the remote PPP peer
asks for authentication. This name can contain up to 15
characters.
Remote Password
Rate Annex uses when the remote PPP peer requests
authentication. For security reasons, Annex Manager displays
this parameter's value as
to 15 characters.
The
box provides access to the
Modem
CSMIM/Micro-CS Management Application Guide
specifies the amount of time in minutes
causes the Annex to disconnect as soon
255
specifies the number of minutes that a
buttons to define incoming call activity.
Output Is Activity
buttons define activity as input. If you click the
buttons defines activity as output. If you click the
box defines data for authorization on a remote PPP peer.
contains the user name by which the ISDN
defines the password that the ISDN Primary
When an option is unavailable it appears in grey: you
cannot select such options.
Using the Call Defaults Window
or
. This name can contain up
set
unset
window.
Edit Modem
(zero) disables the
0
Input is Activity
On
8-7
Advertisement
Table of Contents
