Table of Contents
Advertisement
Connect Status String
initiates an outbound call. This string lists all successful
connect messages that the modem can return. You can enter
up to 80 status codes.
Dialin Setup Command
incoming modem ports before the first user connects to a port.
The command should include all modem steps required to
answer a call coming into the Annex. For example, it should
turn on the auto-answer feature and disable inbound modem
connect messages.
Dialout Setup Command
to all serial device ports before they becomes active. This
command should contain all configuration information required
for the Annex to initiate an outbound call. For example, it should
disable the auto-answer feature and enable modem connect
messages. You can enter up to 80 characters.
Revert to default modem values
when you have changed the default definition.
Using Push Buttons
The
window uses the
Edit Modem
buttons. For Annexes with asynchronous ports, it uses the
Remove
file. When you press
modem name and definition from the
list. When you press
Annex Manager deletes the modem definition from the Annex
configuration file.
Creating and Changing Modem Definitions
The
window lets you change existing modem definitions, create
Edit Modem
new ones, and remove definitions from the Annex configuration file.
CSMIM/Micro-CS Management Application Guide
Creating and Changing Modem Definitions
contains the string the Annex uses when it
contains the command the Annex sends to
contains the command the Annex sends
deletes modems defined in the Annex configuration
OK
Apply
displays default values for a modem
,
OK
Help
, Annex Manager removes the
Edit Async Port
in the
Edit Async Port
, and
push
Cancel
Remove
window's
window,
button:
9-3
Advertisement
Table of Contents
