Table of Contents
Advertisement
Once you reset an Annex, a warning window appears. This
window lists the Annexes that were reset and, if necessary,
lists Annexes where
Broadcasting Messages
The
command lets you send messages to all ports on one or more
Broadcast
Annexes. You can use this command to communicate quickly with all
terminals connected to the Annexes you select. This section includes:
Displaying the Broadcast Window
Understanding the Broadcast Window Format
Sending a Broadcast Message
Displaying the Broadcast Window
Displaying the Window
The
command appears in the Configure menu. To display the
Broadcast
window:
1
Create an Annex list in the main window.
2
Select one or more Annexes from the list.
3
Move the pointer to the Configure menu and choose
The
Broadcast
The following example shows the
CSMIM/Micro-CS Management Application Guide
was unsuccessful.
Reset
window appears (see Figure 16-5).
Broadcast
Broadcasting Messages
window.
.
Broadcast
16-13
Advertisement
Table of Contents
