Cabletron Systems CSMIM-T1 Administrator's Manual page 340

Chapter 19 Annex Parameters
demand_dial
allows a port to use demand dialing. You cannot use this parameter unless
the parameter enables demand dialing.
option_key
Type Async
Values enabled or disabled
Default disabled
Lists Async Port, PPP, SLIP
DHCP_broadcast
determines whether or not an Annex broadcasts for DHCP services if the
preferred DHCP servers are not available.
Type Annex
Values enabled or disabled
Default disabled
Lists Annex Only
dialup_addresses_
origin
allows an Annex to search the
and to set local and remote addresses. This parameter applies only when
the parameter is set to
mode
acp_dialup
If the file contains a matching user name and:
If the file does not contain a matching user name, the
Annex uses values from the
parameters:
19-40
acp_dialup
,
slip
:
The local and remote addresses exist in the
file, the Annex uses those values.
The the
acp_dialup
not a local address, the Annex uses the remote
address from the file and the Annex's IP address for
the local address.
If both parameters contain addresses, the Annex uses
these values.
If both parameters are set to
negotiates for both addresses with the remote PPP
CSMIM/Micro-CS Management Application Guide
file for the remote client's user name
, or
ppp autodetect.
file contains a remote address but
local_address
0.0.0.0
acp_dialup
and
remote_address
, the Annex