Table of Contents
Advertisement
Chapter 19
Annex Parameters
can set
enable_security
password here.
Type
Annex
Values
0 to 15 characters
Default unset
Lists
Annex Only, Security, Virtual CLI
vcli_security
controls user validation on virtual CLI connections to and from an Annex.
If you choose
enabled
CLI connections and executes the same user validation, including user
name and password, that it uses with CLI security on asynchronous ports.
This parameter works with host-based security only if you set
to
.
enabled
Type
Annex
Values
enabled or disabled
Default disabled
Lists
Annex Only, Security, Virtual CLI
zone
provides the AppleTalk zone name that the Annex uses at start-up. You
must use spaces to separate zone names (e.g.,
escape embedded spaces, use the backslash (\).
Type
Annex
Values
0 to 32 characters
Default " " (null string)
Lists
Annex Only, AppleTalk
19-100
to
, choose
enabled
, the Annex enables connection security for all virtual
CSMIM/Micro-CS Management Application Guide
for
disabled
vcli_security
general engineering lab
, and enter a
enable_security
). To
Advertisement
Table of Contents
