Table of Contents
Advertisement
Annex Manager's Setup mode appears when you first use Annex Manager
software. This mode allows you to configure one or more Annexes by setting
the most commonly used parameters.
PRI Internal Modems, Reset
commands. Commands that are unavailable appear in grey
Status
text.
You can use the menu's
Customize mode. Customize mode lets you set individual Annex
parameters and provides access to all main menu commands.
For detailed information about using Customize mode, see Part
3.
A series of Setup mode windows allows you to change Annex settings.
Each window groups related settings and provides access to fields based
on your previous selections. You can select:
The
General
settings. If you press this window's
window allows you to view and change additional Annex
settings.
The
Async Ports
press
configurations.
The
Call Defaults
parameters for ISDN Primary Rate Annexes.
The
Channels
Primary Rate Annex channels.
The
T1/PRI Line
switch type.
The
Security
CSMIM/Micro-CS Management Application Guide
CHAPTER 5
SETUP MODE BASICS
The Setup mode limits your access to Annex Manager
commands. If you use this mode, you can use only the
,
Open Annex List
Save Annex List
,
window to change the most commonly used Annex
window to select one or more ports. When you
here, you can change port and modem
Edit Port
window to set the most commonly-used
window to assign remote addresses to ISDN
window to set the ISDN Primary Rate Annex's
window to change security settings.
,
,
Boot
,
SNMP Information
heading to switch from Setup to
Mode
More
,
Broadcast
Discover Annexes
, and all
Confirm Auto Reset
button, a second
,
5-1
Advertisement
Table of Contents
