Understanding Setup Windows - Cabletron Systems CSMIM-T1 Administrator's Manual

Chapter 5 Setup Mode Basics
The
AppleTalk
AppleTalk zone.
The window to select Internet address and interface routing
IP
settings.
The
IPX
The
LAT
Setup mode uses windows that allow you to change Annex settings as well
as Help, Warning, and Confirmation windows. This section explains Setup
mode windows in the following sections:

Understanding Setup Windows

Displaying Setup Windows
Understanding Setup Window Fields
Using Push Buttons
Using Confirmation Windows
Understanding Setup Windows
Setup mode uses the following types of windows:
The main window provides access to Setup mode windows.
Although it always appears, you cannot return to it unless you
first close all Setup mode windows.
Setup mode lets you change frequently-used settings in
,
General Async Ports
, , and
IP IPX
an option from the
When you complete the window's fields and press
your changes take effect. You can then choose another
field option or press
A
Confirmation
Close
your changes will not take effect if you continue the closing
process.
5-2
window to configure Annexes that use the same
window to choose an IPX frame type.
window to change LAT servers and group codes.
,
Call Defaults
windows. You can display a window by selecting
LAT
Setup
Close
window appears if you change settings and press
rather than
Apply
CSMIM/Micro-CS Management Application Guide
, ,
Channels PRI Line
field that appears in each window.
to return to the main window.
. This window informs you that
, ,
Security AppleTalk
,
Apply
Setup
,