Table of Contents
Advertisement
Chapter 16
Booting and Resetting Annexes
1
Create an Annex list in the main window.
2
Select one or more Annexes from the list.
3
Hold the mouse button on the Configure menu, choose
release the mouse button.
The
Boot
The example below shows the
In this example, the
values automatically. If you select multiple Annexes whose values differ,
these fields do not contain values. For example, if you select two Annexes
with the same
Pref Load Addr
window will appear and the
Understanding the Boot Window Format
The
window's radio buttons define the type of boot operation. Text fields
Boot
control the boot image, load and dump addresses, time, and message to
users. Annex Manager's standard push buttons activate the command. This
section describes each window element.
16-2
window appears (see Figure 16-1).
Boot
Figure 16-1. Boot Window
,
Pref Load Addr
and different values for
Pref Dump Addr
CSMIM/Micro-CS Management Application Guide
window for a single Annex.
, and
Pref Dump Addr
field will not display a value.
Boot
fields display
Boot Image
a warning
Pref Dump Addr,
and
Advertisement
Table of Contents
