Table of Contents
Advertisement
Chapter 13 Viewing and Changing Parameters
messages if necessary. The
verify the
option and parameters that require an Annex reset, the
Parameters
Show Values
parameters in the message box. When you use this button to
verify current values, it erases new values you entered but does
not deselect marked parameters.
An asterisk appears in the button if you use
then change the main window's Annex list or port information,
or this window's port numbers. The asterisk indicates that the
message box values may not be current. It disappears when
you press
Clear Display
and deselects marked parameters. It does not change values
displayed in the work area.
Save Msgs
enter a file name in the
the contents of the
to return to the
Help
Close
in the main window to display these new parameters.
Changing Parameter Values
allows you to change parameter values. You can select new Annexes,
Set
ports, parameter groups, individual parameters, or check original values
during this process.
Changing Values
To change values:
13-10
command. If you selected the
Set
window follows.
displays parameter values in the work area and lists
again.
Show Values
deletes current information from the message box
displays the standard
Selection
window's output box, or press
Set
window.
Set
displays a window explaining the
removes the
You can leave the window displayed and use
select a parameter option that differs from your original
selection. In this case, you must choose
CSMIM/Micro-CS Management Application Guide
Confirmation
File Selection
field and press
window from your display.
Set
window allows you to
Confirm Auto Reset
and
Show Values
window. You can
to store
OK
Cancel
command.
Set
again to
Set
Set
Reset
again
Advertisement
Table of Contents
