Cabletron Systems CSMIM-T1 Administrator's Manual page 227

you can enter values in the
Quiet,
fields, but you cannot enter text in the
5 Choose
A
Confirmation
Figure 16-2. Boot Command Confirmation Window
You can choose
to return to the
Annex Manager notifies the console and all terminals
connected to the Annexes you selected about the boot.
Once the boot takes place, a warning window appears. This window
lists the Annexes where the boot transmission was successful and,
if necessary, lists Annexes where the boot transmission was
unsuccessful.
CSMIM/Micro-CS Management Application Guide
If you select a single Annex,
Dump Addr
current addresses and image.
If you select multiple Annexes whose values differ for
,
Pref Load Addr Pref Dump Addr
appear. If you leave these fields blank,
the current load and dump addresses for each
selected Annex, and will use the value in the
default_image_name
enter new values in any available field.
.
Apply
window appears.
W
ARNING
OK
window. When you choose
Boot
Pref Load Addr
Boot Message
, and display the Annex's
Boot Image
, or
Boot Image
parameter for
Boot Image
to activate the boot or
Booting Annexes
and
Boot Image
field.
,
Pref Load Addr Pref
, values do not
will use
Boot
. You can
Cancel
,
OK
16-7