Cabletron Systems CSMIM-T1 Administrator's Manual page 384

Chapter 19 Annex Parameters
rts_signal
controls the RTS (Request to Send) signal for the port. Entering a value
for an idle port produces an error condition.
press
reset process and to use the parameter values you entered.
Type Async
Values unknown, high, low
Default unknown
Lists Async Port
rwhod
determines whether the Annex listens for RWHO broadcasts when it builds
the host table.
Type Annex
Values enabled or disabled
Default enabled
Lists Annex Only, Modem
security_broadcast
determines whether an Annex broadcasts for security validation if the
preferred security servers are not available.
Type Annex
Values enabled or disabled
Default enabled
Lists Annex Only, Security
server_capability
defines an Annex as a file server host. You can enter:
to define the Annex as a file server for the configuration,
all
operational image, and message-of-the-day files
to define the Annex as a file server for configuration files.
config
to define the Annex as a file server for Annex operational
image
code.
19-84
If you change the value for this parameter and then
reset a port or reboot an Annex, the parameter will
return to its original default value. Therefore, you must
in the Reset Parameters window to prevent the
Cancel
CSMIM/Micro-CS Management Application Guide
.