Cabletron Systems CSMIM-T1 Administrator's Manual page 115

configuration. The button you choose here, combined with your
selections in the
selections in the
Modem
modem specified in the
field. This button selects the
Flow Control
No Modem
modem. It deselects
Software
Disable
cannot enter additional information in the window.
Other
currently define x25, tn3270, pc, terminal, or printer as the
type of device attached to a port. You can return to the
main window and use Annex Manager's Customize mode
to check these values. If the
this window appears, you can select the
or
Disable
The
Direction
receives data.
The
outgoing or incoming connections. You can select
incoming
selections in the
you can use. When an option is unavailable, it appears in
grey: you cannot select such options.
The
Mode
This box includes the following buttons:
Autodetect
protocol as IPX, PPP, ARAP or CLI.
Serial
other serial devices attached to this outgoing port.
PPP
using PPP.
CSMIM/Micro-CS Management Application Guide
Direction
box.
Mode
indicates that the ports you selected will use the
to
Hardware
indicates that the ports you select will not use a
, and disables the
disables the port. If you select this button, you
indicates that one or more ports you selected
buttons. You cannot select the
box determines whether the port transmits and/or
and
outgoing incoming
, or both. These buttons, combined with your
Type
box defines the type of access available on a port.
allows a port to identify an incoming packet's
provides access to modems, serial line printers, and
specifies that a port can perform as a network interface
Using the Edit Async Ports Window
box, determines the available
window's
Edit Modem
Modem Signals
.
, sets
Modem Signals
box.
Modem
button is selected when
Other
buttons allow the port to use
box, determine the
Modem Name
button and sets
to
Flow Control
,
Modem No Modem
button.
Other
outgoing,
box options
Mode
,
7-5