Cabletron Systems CSMIM-T1 Administrator's Manual page 345

codes. You can enter
(e.g., , , ) or a range of numbers separated by dashes (e.g.
1 5 7
Type Annex
Values all, none, or numbers from 0 to 255
Default none
Lists Annex Only, LAT
hardware_tabs
allows the Annex to convert ASCII tab characters to the correct number of
spaces when a terminal does not support hardware tabs. This parameter
works only for CLI sessions.
Type Async
Values enabled or disabled
Default enabled
Lists Async Port, Command Line Editing
host_table_size
defines the number of entries allowed in the host table. Entering
an unlimited number of entries. Entering
table. In this case, the Annex requires a name server to resolve every host
name.
Type Annex
Values 0 to 255
Default 64
Lists Annex Only, Modem
image_name
provides the file name for the operational code that loads by default when
you boot an Annex. You can enter a name using up to 100 characters.
Type Annex
Values 1 to 100 characters
Default " " (null string)
Lists Annex only
CSMIM/Micro-CS Management Application Guide
, , a series of numbers separated by commas,
all none
indicates that there is no host
254
).
1, 5, 200-255
allows
255
19-45