Understanding The Annex T1 Internal Csu Status Window - Cabletron Systems CSMIM-T1 Administrator's Manual

Chapter 17 Displaying Status Information
For more information about creating Annex lists, see Saving
and Opening Annex Lists on page 4-13.
2 Select a single Annex that contains a T1 DS1 interface from the
list.
3 Hold the mouse button on the Status menu, select
4
Choose Internal CSU
The
Annex T1 Internal CSU Status
(see Figure 17-6).
The following example shows the
Figure 17-6. Annex T1 Internal CSU Status Window

Understanding the Annex T1 Internal CSU Status Window

The
Annex T1 Internal CSU Status
T1 Alarms, T1 Status
field. You can enter information in this field. Like all Annex status
Interval(s)
commands, you cannot change an Annex configuration from this window.
17-24
and release the mouse button.
window displays information in the
and
Interval Information
CSMIM/Micro-CS Management Application Guide
window appears
Annex T1 Internal CSU Status
boxes. In addition, it includes the
T1.
window.