Table of Contents
Advertisement
Chapter 15
Comparing and Copying Parameters and Values
The
DS1 Line Params
values.
The message below these buttons summarizes your selections. If you
chose
Annex vs. Annex
includes information from the main window. If you change your selections,
this message reflects your changes.
After you select an option, you can choose the Annex and/or scripts you
want to compare.
Selecting Annexes and Scripts for Comparison
The
command uses two list boxes and corresponding fields to
Compare
define the Annexes or scripts whose parameters will be matched. A
Comparison Output
Using List Boxes, the Port Type Button, and Fields
The comparison option you select determines the kind of boxes and fields
that display. When you compare:
Two Annexes, each box displays your Annex lists, a port type
button, and a port number field for each Annex list. A message
appears below the
comparison will be based on your selections in the main
window. You can select one Annex from each box, and a port
type and number for each Annex.
Annex Manager compares two Annexes based on the
parameter options you selected. If you select
and a parameter option that includes port parameters, the port
type you enter must match your main window selections.
Figure 15-2 shows the window that compares two Annexes.
15-4
option to compare T1 DS1 port parameter
and the
Main Window Params
box monitors the results of the process.
displays reachable Annexes only. If your Annex
Compare
list includes an unreachable Annex, its name will not
appear in the
Compare
Compare Options
CSMIM/Micro-CS Management Application Guide
options, the message
window's list box.
reminding you that the
Main Window Params
Advertisement
Table of Contents
