Changing Internal Modem Status - Cabletron Systems CSMIM-T1 Administrator's Manual

Chapter 16 Booting and Resetting Annexes
Used
Failed
Using the Modem Status Button
The
Modem Status
can select:
Available
or
Busy Failed
in use.
prevent an ISDN Primary Rate Annex from selecting a
Busy to
modem that may not be operating properly. If you select
for a modem with a
effect until the current call terminates.
When you change a modem status, the Modem List box reflects your
changes immediately.
Using Push Buttons
Set PRI Internal Modems
Apply
modems you selected.
Update
Help
command.
Modems
Close
display.

Changing Internal Modem Status

Using the Broadcast Command
You can use when you need to communicate quickly with all terminals
connected to an Annex. To send a message:
1 Create an Annex list and select one or more Annexes.
2 Select
PRI Internal Modems
16-18
indicates that the modem is handling a call.
indicates that the modem is not working.
button allows you change an internal modem's status. You
to make a modem available when its current status is
. You cannot choose
Used
uses the following push buttons:
activates the
gives you the current status of each internal modem.
displays a window that explains the
removes the
CSMIM/Micro-CS Management Application Guide
Available
status, the
Busy
PRI Internal Modems
Set PRI Internal Modems
from the Configure menu.
for modems that are
status will not take
command for the
PRI Internal
window from your
Busy